FS/WTT-Misc Stuff

[Arius]

hey guys, i've been cleaning a bit and ive got a good bit of stuff here. it's very random, sometimes broken and useless, but if you have a use for it, its better than tossing it out. so if you want anything, shoot me a pm.

http://i36.photobucket.com/albums/e25/AriusAneid/airsoftforsale.jpg

prices without shipping and are open for negotiation, so if you're interested, please let me know! and more pics upon request.

1. unknown part i received with DBOYS CASV (free with other purchase or just pay for shipping)
2. woodland cap, size 7.5 i think. got it at goodwill but it feels legit, nothing wrong with it just too small ($5)
3. broken M4 hi-cap, still has part that broke ($5)
4. DBOYS M4 CASV gear box, electricals are shot and other parts used but it hasn';t been opened, but they're all in there still. gearbox itself in great shape. ($15)
5. rear flip up sight from DBOYS CQB M4 RASII ($15)
6. OD holster, never used, got in a trade ($15)
7. holsters i got from fleet farm years ago ($5)
8. Dboys M4 plastic body and metal outer barrel, wobbles a bit ($15)
9. extra tamiya connectors (free with other purchase, or just pay for shipping)
10. Dboys stock cylinder, piston, that whole set up, like-new. only used for testing the gun before being replaced. ($15)
11. SOLD
12. SOLD
13. 1. spring from M4, not sure what from exactly. 2. mag release for m4 (free with other purchase or pay for shipping)
14. 1. metal part that slides back underneath the M4 dust cover (free w/purchase or pay shipping) 2. stock motor, used ($10)
15. stock dboy piston ($5)
16. nasty orange things (free w/ purchase or pay shipping)
17. regular M4 length stock barrel ($10)
18. sling swivel, missing one peg but i've got one you might be able to modify to work ($3)
19. broken red dot, really nice but the on-off switch broke. if you can ghetto rig it, it'd be nice to have ($5)
20. grip, if you're interested, you'll want more pics to be sure its what you want cause it's kinda... different.
21. crappy red dot, works fine (free w/ purchase or pay shipping)
22. base plate for grip, not sure from where (free or pay)
23. vert grip ($5)
24. stock M4 CQB length JBU barrel, like-new (only used to test gun) ($10)
25. came off my CASV, goes between the body of the gun and the stock i believe (free or pay)
26. 1. full set of stock DBOYS plastic bushings (free or pay) 2. tons of shims, may have enough for a full set ($5)

any questions, lemmie know. more pics, lemmie know. wanna negotiate, i'll be more than happy :) thanks for looking!

Only trade i'm looking for right now is TM P226 magazines.

[ArchEnemy]

for 24 is the hopup come with it aswell?

[Arius]

yes, the barrel and the hop up unit is together.

[Arius]

bump. offer up on anything, i just want this stuff gone. gonna just have to toss it in the trash pretty soon.

[J-man]

Gearbox+spring sold to me.

Buy his stuff there is a lot of legit parts here. Great guy to deal with.

[Arius]

4-SOLD

24-SPF

23-both vert grips available

[Arius]

5 & 8- spf

[Ascadian]

Are the vertical grips for a RAS system? If so do you have a pin for one if I bought it.

[Arius]

the foregrip on the left actually has a part on the bottom that you just use your fingers to screw in and then there's a pin on the top that locks it in place on the RAS/RIS. It's very stable as well. i can get a pic if you like.

otherwise the other one is still for sale too, and that has a little spring loaded switch on the side that pulls down a pin that keeps it in place on the RAS/RIS.

[Arius]

23 (left grip) SPF

[Arius]

grip sold.

bump otherwise!

[Arius]

BODY AND OUTER BARREL SOLD!!

REAR SIGHT SPF!!!

UPDATE PICTURE!!!

http://i36.photobucket.com/albums/e25/AriusAneid/IMG_2671-1.jpg

BOLD=SPF

1. holsters i got from fleet farm years ago ($5)
2. OD holster, never used, got in a trade ($15)
3. Multicam pouch. Molle attachments ($5)
4. woodland cap, size 7.5. got it at goodwill but it feels legit, nothing wrong with it just too small ($5)
5. grip, if you're interested, you'll want more pics to be sure its what you want cause it's kinda... different.
6. crappy red dot, works fine (free w/ purchase or pay shipping)
7. broken M4 hi-cap, still has part that broke (offer whatever or free with other purchase)
8. regular M4 length stock barrel ($10)
9. broken red dot, really nice but the on-off switch broke. if you can ghetto rig it, it'd be nice to have ($5)
10. orange tip (free with purchase or pay shipping)
11. Dboys stock cylinder, piston has some wear (wasn't aware of before, but nothing is broken), that whole set up. only used for testing the gun before being replaced. ($15)
12. mag release for m4 (free with other purchase or pay for shipping)
13. strap, ties to the gun and has a loop for a 3-point sling to clip to (free or pay shipping)
14. spring from M4 (somewhere in the hop up/dust cover set up)
15. base plate for grip, not sure from where (free or pay)
16. extra deans (free or pay ship)
17. shims, should be a full set between the two, i can get more pics if needed ($3)
18. full plastic bushings (free or pay ship)
19. part under dust (free or ship)
20. stock piston (free or ship)
21. came off my M4 CASV, went between the stock and body to add another spot for the sling (free or ship)
22. random part for CASV, never found out what its for (fre eor ship)
23. some random screws and pins
24. used to fill an old shotty mag
25. extra tamiya connectors
26. Dboys motor ($10)
27. Sling swivel, might be missing a pin but easy to rig to work ($5)
28. vert grip ($3)

a lot of this stuff im happy to give away for free. i'd rather do that than just toss it in the trash and then find out someone needed it. thanks for looking, post of PM for pics and more info :)

[emokid666]

what size is the bushings

[Arius]

the plastic bushings are 7mm

[Arius]

Almost forgot to post, just gauging interest:

i have a WE 1911 for sale. it's had it's issues in the past and even now isn't the greatest. it's had issues with getting stuck on the hammer (not a strong enough recoil spring i'd assume). the hammer is slightly shaved off and the spring guide has a few o rings on it to add pressure onto the spring to get over the hammer. It is a gas guzzler as most WE's are. the two mags i have with it have developed issues, how i have no clue. One of the springs is warped. and on the other one the thing that physically pushes the BB up broke off the spring. all the parts are still there though. it is a metal bodied gun and is missing the rear sight.

I'm not expecting much for it. if there's any interest at all, please let me know. i can get pics upon request. parting out is an option, but i'd ask you take the majority of the parts, as it'll just be harder for me to sell in the end.

[ArchEnemy]

Almost forgot to post, just gauging interest:

i have a WE 1911 for sale. it's had it's issues in the past and even now isn't the greatest. it's had issues with getting stuck on the hammer (not a strong enough recoil spring i'd assume). the hammer is slightly shaved off and the spring guide has a few o rings on it to add pressure onto the spring to get over the hammer. It is a gas guzzler as most WE's are. the two mags i have with it have developed issues, how i have no clue. One of the springs is warped. and on the other one the thing that physically pushes the BB up broke off the spring. all the parts are still there though. it is a metal bodied gun and is missing the rear sight.

I'm not expecting much for it. if there's any interest at all, please let me know. i can get pics upon request. parting out is an option, but i'd ask you take the majority of the parts, as it'll just be harder for me to sell in the end.

pics? also what type of 1911? is it MEU? single stack correct? (not looking for a hicappa)

[Arius]

http://i36.photobucket.com/albums/e25/AriusAneid/IMG_2672.jpg
http://i36.photobucket.com/albums/e25/AriusAneid/IMG_2673.jpg
http://i36.photobucket.com/albums/e25/AriusAneid/IMG_2675.jpg
http://i36.photobucket.com/albums/e25/AriusAneid/IMG_2676.jpg

there ya go. it's maybe, 2ish years old. has been repaired professionally ages ago after breaking soon after i got it (don't remember what exactly was wrong with it). can't tell ya how many rounds through it, maybe 2000 at most (didn't use it a whole ton). like i said, it's got it's quirks and issues, but now that i have those o-rings on the spring guide, its only issue is getting only 6-7 shots per mags (and the mags having their own issues).

to everyone, i've got a couple people interested so send me PMs if you're ready to offer, with whatever you're offering or more questions. as for offers, i am still accepting trades for TM P226 magazines. otherwise, i need cash as I've had a few hiccups in life and could use as much as i can get right now (then again, who doesn't) so it'll probably just end up going to the highest bidder (assuming all interested parties continue to be interested).

I live in green bay btw. pick up would be the better choice. comes with original box and manual (i think).

I WILL BE GONE UNTIL SUNDAY!!! I'm at a music festival from today until then and thus i will only have about 5 minutes of spare internet time, and WAA isn't where that time is gonna go sadly :P so bear with me. thanks for all the interest!


SPF
25. extra tamiya connectors
21. came off my M4 CASV
18. full plastic bushings
16. extra deans
10. orange tip

[Arius]

26 spf

[Arius]

26 sold

[Arius]

bump for the 1911 mainly

[Arius]

25. extra tamiya connectors
21. came off my M4 CASV
18. full plastic bushings
16. extra deans
10. orange tip

all sold.

still looking to sell the 1911. two mags (some issues, but fixable). really need the money cause the you know what has hit the fan lately. thanks for looking.