WTS M4s And other guns/Parts (large pictures)

[J-man]

First of all i dont mind driving up to 50 miles from oneida to make a sale.

Second of all. All sales are final but should a airsoft marker become damaged after a sale ill help to repair it. (Excluding Boneyard items)

Thirdly I down grade all my AEG's to become Field Compliant for any Airsoft Field, all my AEGS will be under 400fps.

Fourthly only Sniper rifles when i get them in will be over my no 400fps rule.

Lastly I do Take Trades,
List of wanted Trades
AKS-74u
Scar-l
SRC RPK
KWA/KSC Glock extended Magazines
We Dragon 7.0 Black Version

AEGS

1 JG M4 with M16 Full stock
Painted OD Green with black Trim/Externals
Internal Upgrades
G&P tappet plate annd airnozzle
Systema Hop-up bucking
a High Tourqe motor For a more consistant Trigger pull
Wired to the Stock so a bigger batter pack can be used.
IS NOT LIPO READY!
Comes with one 300 round hicap
Comes with a Cut off Rear m4/m16 sight
http://i66.photobucket.com/albums/h275/cezqbouncer/AIRSOFT%202k10/Photo199.jpg
Note: its the top m4
comes with a 8.4 1100mah nimh batter but one of the contacts needs to be resodered.
FPS is around 330 using RED wolf's soda Chrono
$120

1 Dboys Modified CQBR (Pather arms cyberfail rebrand)
Black,
Replaced stock body with a SRC Knight MBK
Classic army hop-up system was installed
Systema Bucking
Stock motor/Gearbox
Shooting around 380 FPS
But not suitable for a long range gun.
Needs a TBB to be able to get more than 40 ft out.
Comes with one 300 round hicap
Also includes a M16 Styled Carry handle
http://i40.tinypic.com/10p3fdd.jpg
comes with a g&P 8.4v 2200 mah nimh
$160

Spring Operated

UTG Master Sniper
Black with Red Tiger Striping
Orange tip has beenremoved to improved MoA
1 20 Round magazine
Ris Rail for mounting optics/bipod
Dosent come with a Scope or bipod
http://i47.tinypic.com/24gq3i1.jpg
fps 380 ish
$70

UTG Shell loaded Shotgun
Black, Removed the crappy RIS on it.
Comes with 1 2 round Shell (magazine)
Pistol grip is cracked on one side but dosent hamper workability
FPS around 300
http://i50.tinypic.com/juzex3.jpg

$15

Gas Weaponry

KWC Taurus PT92
Silver
Its a Gas blowBack Replica of a m9 (taurus version)
ABS construction, but its quality and not ACM plastic
The slide does not lock back on the last shot
But its a ver economical Gas blowback, Uses less gas then other guns.
16 round Magazine included
Mags are avalable online for $20-$25 each
http://www.airsoftmegastore.com/v/vspfiles/photos/CB-210601-2T.jpg
$37

KWC Colt National

Its a replica of a M1911 Single Stack
ABS Plastic not ACMplastic its quality.
Comes with 3 15 Round magazines
Mags have been disconinued so there worth about $30 a pop now days.
Needs temperatures to be 60 degrees or warmer to function flawlessly, if using in colder temp only load 5-8 shots.
http://i50.tinypic.com/sceyo8.jpg 3rd mag not pictured
$75

Parts/Accesories

Surplus Russian Army Helmet
Origanlly Bought At Fleet-farm in appleton
Comes with Internal webbing and cheek Strap

$10

Swiss army Pistol holster
got it with a Gun a while back.
I dont need it and if any1 needs a holster
Fits on any belt

$10

Vertical Forgrips
For RIS or Pistols with railed frames

$5 each
$15 for the knights armament

8.4 1100 mah Stick Battery
Wired to Mini Tamaya Works for JLS Scars/Ak series and any other gun that needs a long Narrow battery

$10

BONEYARD
(non-working/In need of repair and im too broke to fix)
JG M16a2
No RIS
Need
a Gearbox
Motor
Magazine catch
Gearbox Pin
http://i43.tinypic.com/4hab5w.jpg
Comes with Externals/ hop-up and inner Barrel

$50

UHC 133 (Smith and Wesson model 29 8" Version)
comes with 6 one round shells
Works fine just needs a new fill Valve. (buy a KWC magazine online) $(20) fix

$18

M4 Hicaps (2x)
Nuff said
They work Sometimes, there temermental
$5 ea

[ArchEnemy]

is the m16a2's inner barrel and hopup still in one piece? and are you willing to part them out?

[J-man]

is the m16a2's inner barrel and hopup still in one piece? and are you willing to part them out?

Yeh but the hop-up is the 2 piece version, the stock barrel is still here. and i would be willign to part them out. Would you need both parts of the hop-up?(the part that attaches to the lower+barrel part.)

[ArchEnemy]

both. i am assuming that this will fit in an m4? i will just need a barrel extension i imagine total inner barrel length is 509 right?

[J-man]

both. i am assuming that this will fit in an m4? i will just need a barrel extension i imagine total inner barrel length is 509 right?
I measured the barrel from tip to tip is 457mm I think i had a ak barrel in that gun. as for the hop up it depends on what kind of lower reciver you got. What kind of hop up do you currently use? The 2 pices needs to be screwed on the lower, but if you got a one piece now it wont work without modification.

[ArchEnemy]

oh then nevermind it wont work :( now i have to buy aftermarket stuff and have a friend assemble it. Q.Q

[J-man]

Stock parted out from M16 parts

New price for parts $40 bucks

[J-man]

M4s Sold on AirsoftForum

Still have everythign else